Product Details:
Specially formulated colourless protecting coating with added Ultra Violet (UV) additive for treatment of interior and exterior cementitives and concrete surfaces against scratching.
Ideally, suited for slate, quarry and paver tile, flagstone stamped concrete and concrete tile.
For all kind of concrete bricks, slates, paves, stone and terra cotta tiles.
Can be used on cementitious substrates too.
Application:
Ensure surfaces are clean, dry and free from dirt, grease, efflorescence (a whitish substance) that can prevent absorption of the sealer. Any organic growth such as fungi or algae should be treated first with PYE FUNGIRID. Repair chip off or concrete surfaces and allow drying before treated. New concrete surface should cure for at least 28 days.
Application
Using brush, roller or low-pressure air spray. Apply evenly on all dry dust free surfaces. For normal application 2 coats are sufficient. However 3 coats may be required for heavy-duty driveway.
Note: PYESLATE SEAL cannot be applied to wet or damp surfaces.
Cleaning of Equipment
Clean all tools and application equipment with white spirit after use.
Technical Information
Colour: Colourless
Form: Liquid
Odour: Solvent odour
Adhesion: Excellent adhesion to clean, dry and sound surfaces.
Drying time: Allow 4 hours between coats.
Coverage: Approx. 7 - 10 sq.m per litre.
Safety: Non-hazardous.
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
