XTRASEAL X'GRIP MS Polymer Adhesive Sealant [MS-609]

MS-609 is a hybrid silyl modified polyether technology based high grip one component strong adhesive.

X-grip is suitable for direct bonding on a wide range of heavy construction materials without support.

Features:

♦ High performance mechanical properties 

♦ Extremely fast grip

♦ Excellent color stability & UV resistance

♦ Does not contain solvent, isocyanate, acid and silicone oil

♦ Non-bleeding and crack resistant

♦ No visible stain even on porous substrate

♦ Can be applied on moist surface

♦ No bubble formation

♦ Paintable & environment friendly

♦ External & internal use

Uses:

MS-609 is specially developed as a universal adhesive for gluing of mirror, assembly of threshold, skirting board, stripes, decorative wall, panel, and porcelain materials.

MS-609 is also applicable for coated metal, stainless steel, copper, zinc, polyester panel, HPL panels, polystyrene, polycarbonate, UPVC, epoxy, finished wood and etc.

Application:

- Substrates must be clean, dry and free from grease. Remove all dirt, oil, grease, detergents and loose material.

- Cut tip off cartridge. Cut nozzle to desired size at45°angle. Screw nozzle onto cartridge. Place cartridge into caulking gun.

- Apply the adhesive onto substrates.

- Bring the materials into position and press well to make sure that the thickness of the adhesive is minimum 2-3 mm between material and surface.

- Because of the high initial strength support during curing is usually not necessary.